Gazer CC100/CC100-XXX/CC100-XXX-L Congratulations on your purchase of Gazer car camera. Please read this manual carefully before using the product. Warnings Avoid impacts, falls and mechanical damage of the camera. Do not attempt to repair the camera yourself, for it may lead to a loss of integrity.
Important information Backup camera Gazer CC100 has a universal car body mount. Gazer models CC100-XXX and CC100-XXX-L are based on Gazer CC100 cameras and designed for installation in the license plate light housing (video camera is integrated into the lamp body). Model CC100-XXX uses the original number plate light (the lamp mounting and socket connection are identical to the original car lamp).
Page 8
Important information When approaching vertically positioned (perpendicular to the roadway) objects and objects or obstacles placed directly on the roadway (wall, pillar) the actual distance to such obstacles corresponds to distance calculated by the parking guidance system. Look around! When approaching objects or obstacles positioned at an angle in relation to the roadway (a tilted tree) or placed above the roadway (the bumper of another car), the actual distance to the obstacle does not correspond to the distance of the assist...
Connection scheme (red) CONTROL UNIT (black) (yellow) (red) CONTROL WIRE (purple) Сamera onnector (red) (white) (black) Scheme of switching and control block Gazer AC100...
Page 10
Connection scheme To connect a Gazer car camera or install a video parking system with Gazer car monitor or Gazer rear-view mirror with a built-in monitor, use Gazer AC100 switching and control unit supplied with the Gazer car camera. Connect the black wire (GND) to the car ground line and the red wire (ACC +) to the car’s ACC supply line (ACC power goes ON...
(red wire +12V, black wire – vehicle earth). Connect the camera to the switching and control block, as shown on p. 9-10. Install Gazer camera instead of the license plate light lamp.