Gazer F150 User Manual page 9

• The Gazer F150g МVR has a function to display shooting location
coordinates on the video. For coordinates to be displayed, the GPS
function must be enabled in the setting menu. One can use the
special Gazer Player to view recorded video clips with reference to
the map. For more details, go the official website www.gazer.com.
• Gazer F150 MVR supports up to two memory cards with the total
storage capacity of 128Gb and allows copying files from one card to
the other. Thanks to this feature, one can record and store more video
files and manage them directly on the MVR.
To select a memory card for recording video files, press MENU (5) to
access the menu, go to the «System Settings»/»Storage» from the
options and then select the memory card.
When the primary card is selected in the menu, it will be used for video
recording until it runs out of space. Once the primary memory card is
full, the MVR will automatically switch to the secondary memory card.
When there is no free space on the secondary memory card, video
recording will stop.
Caution! To prevent the MVR from stopping to record, it is
recommended to enable the loop recording function in the settings
menu. In this case, after the secondary memory card becomes full,
the MVR will automatically switch to the primary card and record new
video files over the old ones in a loop mode. Video will be recorded
continuously due to automatic switching between memory cards
whenever either of them runs out of space.
To copy video files from one memory card to the other, select the video
file you need to copy, press MENU (5) to access the menu, select "Copy
file", and then confirm the selection by pressing ОК (15). To access
the list of files stored on the second memory card, press MENU (5)
to access the submenu, select "Switch card", and then press ОК (15).
Note: Copied photo and video files are stored in the COPY folder in
the memory card root directory. Use a PC to view copied media files.
Usage
ENG
9