Important Information - Gazer F750w User Manual

Important information

• Do not insert or remove the SD card when the device is on. This
can lead to the dashcam malfunction. Wait for 30 seconds after
dashcam shutdown, make sure that all the lights are off for
at least 10 seconds, and only then safely remove the memory
card.
• Set the correct time and date before using the device.
• Use at least 0.5 seconds time interval while pressing control
buttons, this guarantees proper functioning of the device.
• Do not turn off the power for at least 20 seconds after the power
supply cable is connected. This is necessary to help the built-in
battery function correctly.
• If after you have started the car (when the power supply cable
is connected to the dashcam), the device failed to switch to the
recording mode automatically, simply unplug the power supply
cable for ten seconds and then try again.
• Use the restart option (by pressing RESET button) in the follow-
ing cases:
• power indicator is not on when the power supply cable is con-
nected;
• the device does not switch from the standby to the recording
or control mode;
• the device fails to function properly.
• Files protected from overwriting by G-sensor or by pressing a
corresponding button are recorded in a loop with a 30% limit of
amount on the memory card. Check the free space left on your
memory card on a regular basis to prevent data loss (this hap-
pens when the memory card is full).
Warning!
EN
5