Setting The Printing Position And Margins; Shifting The Print-Start Position Forward Or Backward; Shifting The Printing Position To The Left - Roland Soljet Pro III XJ-740 User Manual

5-2 Setting the Printing Position and Margins

Shifting the Print-start Position Forward or Backward

Procedure
Description
You can shift the print-start position forward or backward by using
however, that with some media types, such as heavy or sticky media, performing continuous movement for one
minute or longer may trigger a protective feature and result in an error. Also, never use
➢ When you're using the take-up system
The take-up system may pull the media with undue force, resulting in an error or malfunction.
➢ Before or after executing feed correction
Slackness in the roll media can make it impossible to obtain reliable correction results. Also, slackness in the roll
media after feed correction may cause slippage in the media's movement distance during printing, resulting in
horizontal stripes.
P. 85, "Performing Feed Correction to Alleviate Horizontal Bands and the Like"

Shifting the Printing Position to the Left

Procedure
–
—
˜
™
Printing area
Use to move the media.
and to move the media. Note,
Use to move the heads.
Press .
If the front cover is open, then close it.
Press .
Chapter 5 Feature Reference
in the following cases.
69