Ais And Marpa; Ais And Marpa Alarms - Humminbird SOLIX Series Operation Manual

AIS MARPA
AND
AIS and MARPA allow the control head to display targets on the Chart and Radar Views. While AIS and MARPA share many of the same
menus and functions, some of the requirements and operations are different for each feature.
AIS: Targets within the AIS VHF transmission range are displayed on Chart and Radar Views. An AIS and a compass/heading
sensor must be connected to the control head to enable this feature. The control head can track up to 100 targets at the
same time. If more than 100 targets are reported by the AIS equipment, the first 100 targets closest to your vessel will be
shown. See AIS Overview for more information.
MARPA: Targets are displayed and tracked on the Radar View. A Radar scanner and compass/heading sensor must be attached
to the control head to enable MARPA, and the control head can track up to 20 targets at the same time. See MARPA Targets
for more information.
AIS MARPA A
AND
When an alarm is turned on, an alert will sound or display on the control head to indicate the threshold has been exceeded. The alarm
will use the control head's default setting to provide the alert, and you can also adjust the alarm settings used to trigger an alarm.
The alarms for AIS and MARPA are also affected by the Guard Zone. To set the Guard Zone, see Radar Alarms.
Turn on AIS Alarms
1. Press the HOME key.
2. Select Alarms.
3. Select Alarms > Targets.
4. Under AIS, select an alarm and turn it on. (Tap the on/off button, or press the ENTER key, to turn it on.)
Dangerous Target
Lost Target
Guard Zone (Sec-
tor)
Guard Zone
(Circle)
AIS & MARPA
LARMS
Turn on Dangerous Target to receive an alert if a dangerous target is detected within the AIS
transmission range.
Turn on Lost Target to receive an alert if a target has changed to lost within the AIS
transmission range. A target may be lost if its signal has not been received in the last
8 minutes.
Turn on Guard Zone (Sector) to receive an alert when a target enters the guard zone sector.
See Radar Alarms to set the Guard Zone.
Turn on Guard Zone (Circle) to receive an alert when a target enters the guard zone circle.
See Radar Alarms to set the Guard Zone.
168