Humminbird SOLIX Series Operation Manual page 135

Adjust the Gain Offset
Use Gain Offset to tune the bottom hardness display. For example, if you're fishing a lake where most of the lake has a hard bottom,
reduce the gain so only the hardest bottom is displayed.
1. From the AutoChart Live menu, select Hardness Options.
2. Select Gain Offset.
3. Press and hold the slider, or press and hold the ENTER key, to adjust the setting.
Adjust the Hardness Range
You can adjust the range of bottom hardness shown on the chart by changing the minimum range and maximum range on the
display. The range you select affects how the bottom hardness colors are displayed. The range is displayed in the AC Live Color Bar
with Bottom Hardness selected.
1. From the AutoChart Live menu, select Hardness Options.
2. Select Min Hardness. Press and hold the slider, or press and hold the ENTER key, to adjust the setting.
3. Select Max Hardness. Press and hold the slider, or press and hold the ENTER key, to adjust the setting.
AC Live
Color Bar
NOTE: Use the AC Live Color Bar icon see the selected palette and, from left to right, the AutoChart Live depth range (low to high),
Bottom Hardness range (soft to hard), or Vegetation range (soft to hard).
Adjusting the Bottom Hardness Range
(Map Source: Humminbird)
135 AutoChart Live