Humminbird SOLIX Series Operation Manual page 26

Tools
Tools allow you to manage the control head network operations and saved data. When you connect an accessory to the control
head, a related tool may also be displayed.
Select Settings to change general system settings such as the backlight, units of measurement, and
Settings the time and date format. You can also use this menu to change the main settings for each application
(Sonar, Chart, Radar, etc.). See each related section of this manual for details.
Select Nav Data to manage your saved waypoints, routes, tracks, and groups. You can create new
navigation data from this screen, edit your saved navigation data, or start navigation (see Manage your
Nav Data
Navigation Data).
Required Equipment: GPS receiver (internal or external)
Select Views to access the complete set of views available on your control head. You can edit views,
Views
create your own views, and save your favorite views. See Views for more information.
Select Alarms to view the alarm log, mute alarm sounds, and set the alarms for the individual
Alarms applications. To set up individual alarms for navigation, sonar, radar, AIS, etc., see each related section
of this manual for details. For example, for radar alarm settings, see Radar Alarms.
Select GPS to review the signal strength of the GPS receivers ("sensors") connected to the system. The
tool shows the satellites in the area, the positions, and the signal strength for each one. You can also
designate a primary and secondary GPS source from this tool. See Getting Started, Installation
GPS
Information, and Set up your Humminbird Network.
Required Equipment: GPS receiver (internal or external)
Select Targets to manage AIS and MARPA targets. See AIS and MARPA for more information.
Targets
Required Equipment: AIS or Radar, GPS receiver (internal or external), and compass/heading sensor
Select Trip Log to display Speed over Ground (SOG), timer for elapsed time, distance traveled since last
reset, average speed, and trip fuel. You can also reset the trip log to zero and review trend data from
Trip Log
this tool.
Required Equipment: GPS receiver (internal or external)
Select Timer to set an alarm clock for a selected time of day, use the countdown timer, or use the
Timer
stopwatch. You can set more than one alarm clock.
Select Fuel to review the fuel log for NMEA 2000 fuel sensors connected to the network. This tool provides
refuel alerts and displays the fuel level in graphical form. See Set up a NMEA 2000 Network for details.
Fuel*
*Required Equipment: NMEA 2000 tank sensor and/or fuel flow rate sensor
Home Screen 26