Humminbird SOLIX Series Operation Manual page 43

Change the Overlay Data
Use the following instructions to customize the data displayed in the data overlay. You can also change the overlay color, size, and
position on the view.
1. Open the View Options menu.
2. Select Data Overlays.
3. Select the Edit: menu.
For example, if you have the Sonar overlay displayed, select Edit: Sonar. If you have the Chart overlay displayed, select Edit:
Chart.
NOTE: Any changes to the selected overlay will be applied to other views. To apply changes to the currently displayed view, select View
Overlay from the Data Overlays menu (you may have to scroll to the bottom of the menu).
4. Select Edit Data.
5. Select an overlay position to change. Tap, or use the Joystick to select and press the ENTER key.
6. Select the new data category.
To turn the readout off, select Readout > Off.
7. Select the data type.
8. Press the EXIT key.
9. Repeat: Repeat steps 5 through 8 to change more data overlays.
10.Back: Tap the Back icon to return to the previous menu.
OR
Close: Press the EXIT key until the menu is closed.
Selecting an Overlay Position
Turning an Overlay On/Off
Selecting the Data Category
43
Selecting the Data Type
Views