Humminbird SOLIX Series Operation Manual page 81

Set the Motion Mode
Motion Mode controls how the chart moves on the view. This menu is available in Custom Mode (see The Menu System: Change the
User Mode).
1. From the Preferences menu, select Motion Mode.
2. Select Relative or True.
Relative
True
Turn on/off Vessel Offset
Vessel Offset allows you to see more of the view based on the speed of the vessel. Vessel Offset works with Auto Shift Speed.
1. From the Preferences menu, select Vessel Offset.
2. Select Off, On, or Auto.
Off
On
Auto
3. Close: Press the EXIT key until the menu is closed.
4. To change the Auto Shift Speed Setting, press the MENU key twice. Select My Vessel > Auto Shift Speed.
Turn on Auto Zoom
Auto Zoom focuses the view on the current route leg as it is being navigated. As the vessel's speed increases, the chart range will
increase. If you press the ZOOM keys to see more or less of the view, Auto Zoom will pause.
NOTE: The Auto Zoom setting does not apply to the 3D Views.
1. Press the HOME key.
2. Select Settings.
3. Select Navigation.
4. Under Navigation Options, select Auto-Zoom. Tap the on/off button, or press the ENTER key, to turn it on.
The position of the vessel is fixed on the view and the chart moves with the vessel.
The chart is fixed and the vessel moves towards chart objects on the view.
The vessel is displayed in the center of the Chart View.
The vessel is displayed on the lower part of the Chart View.
When the vessel is moving below the Auto Shift Speed setting, the vessel icon will be displayed
in the center of the view. When the vessel is moving at or above the Auto Shift Speed setting,
the vessel icon will move to the edge of the view so that more of the view is shown on-screen.
81 Chart Options