Humminbird SOLIX Series Operation Manual page 80

Set the Chart Orientation
Use the Preferences menu to change the chart orientation.
1. With a Chart View displayed on-screen, tap Chart in the status bar, or press the MENU key once.
2. Select Chart Options > Preferences > Orientation.
3. Select an orientation to apply to the chart.
QUICK TIP! You can also select the Chart Orientation Menu on the status bar. See the illustration below.
preview window
menu
selection
Head Up
(compass or GPS required)
North Up
COG Up
Course Up
Chart Options
chart orientation setting
The vessel's current heading points up, and the chart rotates around the vessel icon so that
it always points up on the view. The heading is provided by the connected compass/heading
sensor. If a compass is not connected, the vessel will be oriented according to the COG
(Course Over Ground).
The chart is oriented with North up on the display, and the vessel rotates according to its
heading or COG (Course Over Ground).
The chart is displayed with the vessel oriented in a fixed position pointing up, and the chart
rotates according to the vessel COG (Course over Ground).
During navigation, the intended course or route leg is shown at the top of the view. Objects
ahead of the vessel are drawn above the vessel. When the vessel is not navigating, the
current heading is displayed.
80