Humminbird SOLIX Series Operation Manual page 76

Display an Overlay
Choose between Humminbird and Navionics.
With those locations, you just have Satellite Maps (ON), 100%, and Land highlighted. The zoom level has to be less than 2 miles.
1. Open the Layers Menu: Tap the Layers Menu icon in the task bar.
2. Select Humminbird or Navionics.
3. Humminbird: Select Map Overlay or Base Layer. Select 2D Map, AutoChart, or SI Mosaic.
Navionics: Select Satellite Maps, Land, Land + Shoals, or Land + Sea.
2D Map
AutoChart
Land + Shoals
Land + Sea
Satellite Maps
Land
Land + Shoals
Land + Sea
Chart Options
Humminbird Satellite Overlay Options
Select 2D Map to display
Select AutoChart
Select Land + Shoals to display the satellite layer over land and shallow water.
Select Land + Sea to display the full satellite layer.
Navionics Satellite Overlay Options
Select Satellite Maps
Select Land to display the satellite layer over land only.
Select Land + Shoals to display the satellite layer over land and shallow water.
Select Land + Sea to display the full satellite layer.
76