Humminbird SOLIX Series Operation Manual page 245

NMEA 0183
Message Description
AAM Waypoint Arrival Alarm
APB Heading/Track Controller (Autopilot) Sentence "B"
BOD Bearing-Origin to Destination
BWC Bearing & Distance to Waypoint - Great Circle
BWR Bearing & Distance to Waypoint - Rhumb Line
DBT Depth Below Transducer
DPT Depth
GGA Global Positioning System Fix Data
GLL Geographical Position - Latitude/Longitude
GNS GNSS Fix Data
GSA GNSS DOP and Active Satellites
GSV GNSS Satellites In View
HDG Heading, Deviation & Variation
HDM Heading, Magnetic
HDT Heading, True
MTW Water Temperature
MWD Wind Direction & Speed
MWV Wind Speed & Angle
RMB Recommended Minimum Navigation Information
RMC Recommended Minimum Specification GNSS Data
ROT Rate of Turn
VBW Dual Ground/Water Speed
VDM AIS VHD Data Link (Other Vessels)
VDO AIS VHD Data Link (Own Vessel)
VHW Water Speed and Heading
VTG Track Made Good & Ground Speed
XDR Transducer Measurements
XTE Cross-Track Error, Measured
ZDA Time & Date
Configure the NMEA Talker ID
Use the following instructions to change the NMEA 0183 Talker ID to match the NMEA 0183 installed accessory.
1. Press the HOME key.
2. Select Settings > Network.
3. Under Sensor Port, select a NMEA port menu.
4. Select NMEA Output.
5. Under Configure NMEA Talker ID, select IN-Integrated Navigation (Default) or GP-Global Positioning System.
245
Input Output
•
•
•
•
•
• •
• •
• •
• •
• •
• •
• •
• •
• •
•
• •
•
•
•
• •
• •
•
•
•
• •
•
•
•
• •
Control Head Configuration