Changing Tyres - Otto Bock B 600 Instructions For Use Manual

13.3

Changing Tyres

Way of proceeding:
- For dismounting the rear wheels, loosen the Phillips head screw in the middle of
the wheel and remove the wheel cover (fig. 44).
- Loosen the screw of the wheel and pull off the wheel.
- Disassemble the two-piece rim by loosening the four Allen head screws.
- The defective tube is freely accessible and can be replaced.
- For dismounting the front tyres, loosen the screw of the axle and remove the axle.
- Again, disassemble the two-piece rim and replace the defective tube.
B600 – Instructions for Use
Fig. 44: Wheel cover
Fig. 45: Screw of the wheel
Maintenance and Cleaning
95