Control Panel - VWR INCU-Line Series Instruction Manual

4.1 Control panel

1
2
3
4
5
6
– setup (for more information, see point 5.5)
1
– current temperature
2
– set temperature, to change, press the icon or value (for more information, see point 5.2)
3
– alarm bar – if an alarm occurs, the bar is red (for more information, see point 5.5)
4
– status icons (for more information see point 5.4.1)
5
– status – informs about the program status. The following states are possible: ramp, set tempera-
6
ture, program off
–
7
- program is stopped,
formation, see point 5.1)
–
8
elapsed or
mation, see point 5.2)
– Information panel – three different windows, to scroll slide to the right or left (for more information,
9
see point 5.4)
– indicates which window is displayed
10
– current data and time
11
Instruction Manual INCU-Line Peltier Cooled
- program is running – edit, start and stop the program (for more in-
remaining time of program, to change, press the icon or value (for more infor-
7
8
9
10
11
Page 14 / 33