Door Lock; Access Port; Open Door Alarm - VWR INCU-Line Series Instruction Manual

6.2 Door lock

All ILPR units have been equipped with a door lock located in the door handle.
Two keys are attached on the backside of the device.

6.3 Access port

Ø
A 30 mm access port can be used to insert an external temperature sensor, which has been secured with
a silicon plug. The plug should cover the access port while the unit is operating. If multiple cables have been
inserted through the access port and if it is not possible to use the plug, secure the access port with adhesive
tape. If you leave the access port open, it may affect temperature stability and uniformity within the chamber.

6.4 Open door alarm

All incubators have been equipped with an open door sensor. If you open the door, icon:
appear on the display.
If you leave the door open for more than 60 seconds, an alarm will sound and the control bar will be red. The
alarm event "door open" is displayed in the list, with the status alarm active.
Instruction Manual INCU-Line Peltier Cooled
Page 23 / 33