Special Information And Warnings; Warranty Conditions; Standards And Regulations; Delivery Information - Siemens OXYMAT 64 Operating Instructions Manual

Gas analyzer for measurements of trace oxygen
Hide thumbs Also See for OXYMAT 64:
Table of Contents

Advertisement

General information

1.3 Special information and warnings

1.3
Special information and warnings
This manual provides you with information on using, installing, operating, and maintaining
the device.
Pay particular attention to all special information and warnings. Information of this type is set
apart from the rest of the text and is marked with the corresponding pictograms. This
information provides you with useful tips and helps avoid maloperations.
1.4

Warranty conditions

We expressly point out that the product quality is exclusively and conclusively described in
the sales contract. The content of this product documentation is neither a part of a previous
or existing agreement, promise or legal relationship, nor is it intended to modify these. All
obligations on the part of Siemens AG are contained in the respective sales contract, which
also contains the complete and solely applicable liability provisions. The provisions defined
in the sales contract for the responsibility for defects are neither extended nor limited by the
remarks in this document.
1.5

Standards and regulations

As far as possible, the harmonized European standards were the basis for the specification
and production of this device. If no harmonized European standards have been applied, the
standards and regulations for the Federal Republic of Germany are valid.
When this product is used beyond the scope of these standards and regulations, the valid
standards and regulations of the country of the operating company apply.
1.6

Delivery information

The respective scope of delivery is listed on the shipping documents – enclosed with the
delivery – in accordance with the valid sales contract.
When opening the packaging, please observe the corresponding information on the
packaging material. Check the delivery for completeness and undamaged condition. In
particular, you should compare the Order No. on the rating plates with the ordering data, if
available.
If possible, please retain the packaging material, since you can use it again in case of return
deliveries.
8
Operating Instructions, 06/2008, A5E00880383-03
OXYMAT 64

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7mb2041

Table of Contents