Table of Contents
Advertisement
Pic. 40
Choosing the automatic ignition
1 - manual starting (ignition), 2 - automatic starting, 3 – time of glowing the heating coil (by au-
tomatic ignition) , 4 – delay timeof ignition (by automatic ignition), 5 – output the ignition coil
works on (by automatic ignition)
The amount of power with which will be ignited the wood by the pellet section should be well
considered. By too high power there can occur excessive release of gaseous substances from the
wood and the smoke from the loading chamber into the primary air of the boiler. Therefore, we
recommend you try the automatic wood ignition with a lower power setting (approximately
30%).
After clicking on automatic ignitation there is automatically started the pellet section which will
ignite the part for wood. For displaying status information click on „i" (pic.41).
45
Advertisement
Table of Contents
