4. Put the paper or cardboard (the best material), rolled into tubes (Pic. 11). If there are cinders
on the bottom of the feeding chamber, put the paper or the cardboard on them.
Pic. 21
Preparation for lighting up the wood
5. Put the wood of a smaller diameter (chips of 20×20 mm) on the cardboard (pic. 12) to make
the process of lighting up faster and more stable. Put the casual wood on the fine wood in
the way enabling the free air flow. Try to use the feeding chamber in the best way to load as
much wood as possible. Load the full chamber (Pic. 13).
34