ATTACK WOOD&PELLET 25 Instructions For Use Manual page 34

Pic. 20 Choosing type of ignition
7.3.1.1 MANUAL LIGHT UP OF WOOD
1. Turn the main switch on, if it has not been done yet.
2. Open the main door and the door of the feeding chamber. Check the level of ash in the
feeding chamber. If it exceeds 50 mm, clean the feeding chamber – it is not necessary to
clean the feeding chamber every day, if the ash still contains the solid cinders. The cinders
that remain in the ash contain the usable energy and they enable faster lighting up the
wood. The feeding chamber is cleaned through the middle door by the fire hook (See the
chapter 17. Cleaning).
3. Open the door of the feeding chamber and clean it. It is the best to use a fire hook and to
remove the ash ash in direction to you. Always clean the combustion chamber before
heating the boiler up!
CAUTION! If the combustion chamber is not cleaned properly, its volume is rapidly de-
creased and it may cause imperfect burning and dangerous states. Never operate the
boiler with the uncleaned combustion chamber!
33