Application Setting - Mitsubishi Electric MELSEC iQ-R C User Manual

2.3

Application Setting

Set the target IP address.
Window
Displayed items
Item
IP filter setting IP Filter
Access From IP Address
Below
IP Filter Detail Setting
Description
Set whether to use the IP filter function.
Set whether to allow/deny the access from the specified IP addresses.
Set the IP addresses to be allowed/denied.
Do not include loopback address (127.0.0.1) in the target IP address.
The IP Filter Detail Setting screen appears by double-clicking a cell of IP filter
detailed setting.
Setting Range
• Not Use
• Use
(Default: Not Used)
• Pass
• Block
Page 48 IP address
setting screen to be excluded
2 PARAMETER SETTING
2.3 Application Setting
2
47