Replacing The Cpu Assembly; The Disk Drive (M1700A And M1701A Only) - HP PageWriter XL M1705B Service Manual

Replacing the CPU
To replace the CPU assembly, reverse the removal procedure.
Assembly
The Disk Drive
(M1700A and
M 1701A only)
This section describes how to remove and replace the disk drive.
To remove the disk drive:
Caution
Use an electrostatic wrist band or other approved method for
protection against electrostatic discharge when disconnecting cables
from and handling the disk drive.
1. Remove the top cover assembly as described previously in this
chapter.
2. Remove the two screws that attach the plastic vibration mounts to
the chassis.
3. On units having a serial number prefix prior to 3208A, remove the
7/32-inch nut that attaches the ground strap to the chassis (see
Figure 7-21).
Removal and Replacement 7-31