The Keyboard; The User Interface Assembly; Removing The User Interface Assembly - HP PageWriter XL M1705B Service Manual

The Keyboard and
the User Interface
Assembly
This section explains how to remove and replace the keyboard and
the user interface assembly. These procedures apply to all units.
The Keyboard
The keyboard is mounted on the front of the cardiograph in the
user interface assembly. To remove the keyboard, carefully insert a
flat-bladed screwdriver into the slots and pry as shown in Figure 7-3.
To reinstall the keyboard, snap it back in place.
\ _______
. . . . . . . . . --
______
:'- ..t
/&& Qle+~
QQ
l[ -.izs' QQe",Q~
Q wg:/
/
Figure 7-3. Removing the Keyboard.
A. Pry slots
The User Interface
The user interface assembly consists of the main bezel, the keyboard
Assembly
PCB, and the front panel display.
Removing the User Interface Assembly
Caution
Use an electrostatic wrist band or other approved method for
protection against electrostatic discharge when handling the interface
assembly.
To remove the user interface assembly:
1. Set the cardiograph to Standby.
2. Remove the keyboard.
Removal and Replacement 7-5