Installation And Configuration; Installation - HP PageWriter XL M1705B Service Manual

2
Installation and Configuration
This chapter describes how to install and configure the PageWriter
XL M1700A, M1701A, and M1702A cardiographs. This information
provides you with a factory-recommended process to use when
assisting customers. The configuration information guides you
through the configuration menu structure, and describes the
configuration choices.
Installation
The cardiograph is ready for operation when the followitig tasks have
been properly performed:
n
Patient data cable connected.
H Patient electrodes and leadwires installed on patient module.
H Voltage settin, 6 and fuse checked.
n
Battery installed.
n
Software installed (M1701A & M1700A only).
n
Language and line frequency chosen.
n
Paper installed.
n
Clock set (time and date).
n
Configuration parameters chosen.
H Configuration saved to disk (M1701A & M1700A only).
In
addition to these tasks, the cardiograph should be mounted on the
cart if you are using a cart, and the modem attached to the cart if
you are using a modem.
installation and Configuration 2-1