Global Configuration - HP PageWriter XL M1705B Service Manual

Global Configuration
Pressing Global
(from the configuration menu) brings up the
parameter selection display. The first parameter in the Global
list appears. Table 2-3 lists each Global parameter and its setting
choices. The factory default settings are shown in
boldface type.
There are explanations following the table for those parameters that
cannot be adequately explained in the table's Comments column.
Table 2-3. Global Configuration Parameters
Parameter
[nitial Interpretation?l
Setting Choices
Reasons
None
Measure
Interpret
Severity only*
Comments
See "Interpretation Parameters" section
following this table.
Zopy Interpretation?l
4utoStore?3
Reasons
Extend Measure
None
Severity only*
Choice
Measure
Interpret
Yes
No
See explanations following this table.
Determines whether an Auto ECG is
automatically st,oretl without operator
intervention.
Patient ID required? Yes
No
Appears only if AutoStore is "No."
Determines whet,her t,he cardiograph
will require patient ID information
before recording an Auto ECG. If
AutoStore is "Yes," this parameter is
"Yes."
1 This
paramter appears
only on the Ml 700A cardiograph
2 This parameter appears on A.03.XX software only.
3 This parameter does not appear 011 the Ml 702A cardiograph.
2-20 Installation and Configuration