Selecting Configuration Parameters - HP PageWriter XL M1705B Service Manual

Selecting Configuration
When you select or change configuration parameters, the method is
Parameters
generally the same whether you are selecting Global, Transmit, or ID
parameters. The display will be similar to:
Initial Interpretation? Reasons
Enter Choose Exit
In this chapter, this type of display is referred to as the parameter
selection display. The message line on top displays the parameter and
its current setting. The softkey labels are displayed on the bottom
line.
Enter
Accepts the current setting, then advances to the
next parameter in the list; or returns to the menu
if pressed when the last parameter in the list is
displayed.
Choose
Tab
Leads
Previous
Exit
Advances through the list of choices for the specified
parameter.
Appears only for the "Custom" parameters in the
Global list. Used to select the leads for the custom
format. Moves an underscore cursor to the lead to be
changed, then Choose is used to advance through
the list of choices.
Used to select rhythm leads in "Default Auto?"
parameter in global configuration.
Returns to the previous parameter (does not appear
when the first parameter is displayed).
Returns to the menu.
Installation and Configuration 2-19