Transmit Configuration; Transmit - HP PageWriter XL M1705B Service Manual

Transmit Configuration
When you press Transmit-, the "Configure" menu for transmit
appears in the display.
Note .I
ti?
The transmit information in this section applies only to the M1700A
cardiograph.
Configure
Transmit Receive AutoDial Exit
The following list briefly describes the function of each menu
selection. A detailed discussion of each selection follows the list.
Transmit Use this key to configure the cardiograph for four
transmission sites.
Receive Use this key to select the receive connection type and
its baud rate.
AutoDial Use this key to select a site to which the cardiograph
automatically sends an ECG when you transmit.
Exit
Returns you to the previous menu.
Transmit
The Transmit key brings the Configure Site menu to the display:
Configure Site
1 2 3 4 Exit
When you select a site number, a parameter selection display
appears. Table 2-4 lists each parameter and the settings available.
The default setting for each parameter is shown
in
boldface type.
2-28 Installation and Configuration