Interpretation Parameters; Power-On Application (M1755A A.02.X); And Higher Software Only); Line Frequency - HP PageWriter XL M1705B Service Manual

Interpretation Parameters
These parameters determine the amount of information included in
an Auto ECG report.
w InitialtInterpretation controls the information that appears on the
ECG when it is first taken.
n
Copy Interpretation controls the information that appears on
subsequent copies of the ECG.
n
Print Interpretation controls the information that appears on a
printout of a stored ECG.
Each setting choice adds another piece of information to the printed
ECG. The settings' definitions are:
None Prints waveform and patient ID.
Severity only (A.OS.XX only) P ' t rm s waveform, ID, and severity.
Measure
Prints waveform, ID, and measurements summary.
Interpret Prints waveform, ID, measurements summary, and
computer-generated interpretation.
Reasons Prints waveform, ID, measurements summary,
computer-generated interpretation, and interpretive
reason statements.
Extend
Measure
Choice
Prints a tabular summary of all measurements
performed on ECG data. An alternative report.
Allows you to select the level of information included
when an ECG is copied or printed from disk
without having to change the overall instrument
configuration.
Power-on Application (M1755A A.02.XX and Higher Software Only)
To select which application (XLi, Preview Plus, or SAECG) the
PageWriter will start up with, set the "Power
on
application"
parameter to that application.
Line Frequency
This parameter selects the frequency of the filter enabled by the
line power filter. The user usually selects the frequency in response
to a prompt from the system during initial insta.llation. However,
the system will not prompt for a frequency selection when a
custom configuration is loaded. Including this parameter in Global
configuration allows the user to change the frequency selection after
initial software installation.
2-24 Installation and Configuration