Saecg Configuration (A.02.Xx And Higher Software Only); Acquisition Fields - HP PageWriter XL M1705B Service Manual

SAECG Configuration
(A.02.XX and higher
Software Only)
Note ,I
!P
Parameter
Fiducial point?
Correlation coefficient? (0.01 -
0.99)
Average to?
Number of beats? (1 - 9999)'
Noise level? (0 - 100 /lVj2
Automatic file naming?
SAECG configuration can only be accessed from the SAECG,
application. Select
Config from the following SAECG menu.
Print Edit Config
Table B-l and Table B-2 show the configuration options for the
M1754A SAECG application. The default settings appear in bold
type. These defaults are adequate for most applications.
Acquisition Fields
Table B-l shows the choices available to configure acquisition.
Table B-1. Acquisition Configuration Fields
Settine Choices
Left
Center
Right
0.99
Noise level
Beats
200
0.3 LLV
Yes
No
Colrullcllts
I
The peak of the QRS can he moved from the center to the
right or left third of the display and the printed report.
The noise window is moved by the same amount as the
fiducial point.
This controls how closely the acquired beats must match
the template. A value of 0.99 means the acquired beats
must match the temlllate as closelv as 13ossible.
The end of the averaging process is controlled by either
the average noise level of the three leads, or by a total
number of accepted beats.
The total beats that must be collected before the process
completes.
The noise level required before the l)rocess completes.
This controls whether the file is narnetl automatically.
Manual file naming is used for easier file exchange with the
Corazonix Predictor@.
1 This field appears only if Beats is selected in the Average to? field.
2 This field appears only if Boise level is selected in the Average to? field.
B-4 M1754A Signal Averaged ECG (SAECG) System