Ecg Management Parameters; Battery Timeout; Password - HP PageWriter XL M1705B Service Manual

Caution
IP
ECG Management Parameters
These parameters trigger processing protocols on the ECG
management system, and provide information for ECG tracking.
These parameters include:
Location code
Cart ID
Institution
Name
Confirmation
User A label
User B label
A user-defined numeric code limited to five digits.
The first three digits represent the institution and
the last two characters represent the department. It
can be used to identify the origin of the ECG, such
as ER, ICU, CCU, or the department number.
A user-defined code limited to four digits. Identifies
the cardiograph to the ECG management system.
Identifies the institution, such as "Sharon General
Hospital." Limited to 40 characters.
A label that appears on ECGs. Can be the
default label (see table) or user-defined, such as
"MD signature X
>>
Limited to 30 characters. Available only on the
MlTOOA.
Enter user-defined label such as "Smoker?" or
"Apnea. 7" that appears in ID entry process. Limited
to eight characters.
Battery Timeout
To lengthen battery life, the cardiograph turns off after the period of
time specified by this parameter. The time is measured in minutes
from the completion of the last operation, the last key press, or
disconnection of patient leads. The time-out function is disabled
when the cardiograph is plugged into AC and the AC switch is on.
Password
To protect your configuration settings from casual changes, you can
require password entry to access the configuration. This password is
set in Global configuration.
If the password is set and forgotten, you will be unable to change the
cardiograph configuration without reinstalling the factory software.
2-26 Installation and Configuration