Table of Contents
Advertisement
UK
• After 10 hours of operation, tightening of wheels, bearings and stop rings must be done.
• Hoses, fittings and cylinders must be checked for any leaks and retightened.
• When the season is done the roller must be cleaned, lubricated and a thin layer of oil sprayed
on all painted parts.
• Glossy piston rods must be protected by grease.
Lubrication
At every 10 hours operation:
At every 30 hours operation:
Once a year:
Bearings must only be lubricated with 1-2 strokes,
IMPORTANT
otherwise the sealing rings can be released.
X= grease nipples
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m
8. Maintenance
- every roller sections suspension
- wings bushings hinged to wheel frame
- bearings
- cylinders
- wheel frame bushings hinged to chassis
- the support leg
11
20-08-2019
Back to the table of contents
Advertisement
Table of Contents
