Table of Contents
Advertisement
UK
6. Safety Instructions, regarding Hydraulic System
1. The highest allowable pressure, is 225 bar.
2. It is recommended to mark the hydraulic connections between the implement and tractor, to
avoid incorrect operation!
3. When checking for hydraulic leeks, suitable safety gear must be used due to danger. (Safety
goggles , gloves, etc.)
At high pressure, Hydraulic oil can penetrate the skin and course serious injuries.
At injuries, consult a doctor immediately. RISK OF INFECTION!
4. Before any work at the hydraulic system, the implement must be lowered to solid ground.
Pressure must be relieved, engine stopped, and ignition key removed.
5. Check the hydraulic hoses on a regular basis, however, every six months as a minimum due
to any cracks, wear and tear, etc. Replace any defective hoses immediately.
6. Hydraulic hoses lasts for no more than 5 years.
New hydraulic hoses must be identical to the manufacturers specifications.
INSTRUCTIONS FOR TRANSPORT AT PUBLIC ROADS:
Before transport at public roads, make sure that the attachment of the implement to the tractor, is in
accordance with the local rules and regulations in force
transport width, lights and warning signs).
FRONT AXEL LOAD:
When the implement is attached and at maximum load, the tractors driving properties must be
ensured. Check that the front axel is sufficiently loaded. The front axel load must be at least 20% of
the tractors weight. Permitted axel load and total weight for the tractor must be respected.
NB! The driving, controlling and braking properties are affected by the attached implement.
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m
Oil, type Hydro Texaco HD 32 has been
filled in the hydraulic system
(permitted total weight, permitted axel load,
9
Back to the table of contents
20-08-2019
Advertisement
Table of Contents
