Table of Contents
Advertisement
Vip-Roller NG 4,5 – 5,4 – 6, 3 – 7, 3 – 8,2m
UK
20-08-2019
1. Description of the machine
The Vip-Roller is a 3-sectioned hydraulic, wheel mounted roller. Vip-Roller is to be used for
packing the top soil, to maintain the content of moisture in it, and to eliminate not solid stones from
the surface of the cultivated area.
The roller sections has an independent suspension, which gives the sections a perfect adaption to
the ground in uneven areas. The changing between transport- and work position is by hydraulic
force. The roller has a low and compact transport position with a width of 2,4 meters.
Read the manual before operating the roller and strictly follow the safety instructions.
2. Delivery Check
Check the roller for any damages. Check the hydraulic hoses for cuts and squeezing damages.
Check also the other hydraulic components, are not damaged during transport.
Check that the frame construction has not been damaged. You should also check that the roller
blocks have not been exposed to impacts, which may have damaged the cast roller rings or the
double-sealed ball bearings.
Finally check that the transport wheels are tightened and OK.
Check the air pressure in the tyres: approx. 3.8 bar / 55 psi
Instructions for unloading and final assembly
In order to minimize the roller´s space during transport, the
roller is supplied partially separated from the factory. If the
machine is delivered unassembled, it must therefore be
completely installed first
Transport Brackets
At delivery the machine is mounted with brackets for
hoisting gear, which is not painted.
These brackets is for attachment of chains or straps, when
loading or unloading the machine from the transport
vehicle, and they must be dismantled before use.
5
Back to the table of contents
Advertisement
Table of Contents
