Warranty; Eu Declaration - SCANMASKIN SCAN COMBIFLEX 800 PROPAN Manual

Scan Combiflex 800 Propane - Manual

7 Warranty

This product from Scanmaskin Sweden AB comes with a twelve month warranty. If the product does not function
satisfactorily during this period, Scanmaskin will return the product to full working order for normal use which the product is
intended for – with no charge for labour or spare parts, according to the following conditions:
1. The warranty only applies to persons that have legal right to the equipment during the warranty period.
2. The manufacturer's undertaking is limited to the repair of defective parts or the replacement of these according to the
manufacturer's assessment. Costs and risks for transport as well as dismantling and reinstallation of the product /
products and other direct or indirect costs, associated with the repair in question, are not covered by this warranty.
3. Periodic inspections, adjustments, maintenance work and changes are not covered by the warranty.
4. Scanmaskin is not liable for any damages to grinding discs or other similar equipment.
5. The warranty only applies to material and design deficiencies and does not apply in the following cases:
a. Damage caused through accidents, carelessness, changes, use of spare parts or grinding tools that are not
original components, or incorrect use and installation.
b. Damage caused by lightning, water, fire, vandalism, incorrect mains voltage, incorrect ventilation or other
causes that lie outside of the manufacturer's control.
6. Scanmaskin reserves the right to modify the design – or make improvements without obligation to change
previously manufactured products.
7. Scanmaskin reserves the right to modify the design – or make improvements without obligation to change
previously manufactured products.
8. All warranty repairs must be carried out by Scanmaskin or by a Scanmaskin accredited repair workshop. Costs for
repairs, carried out by an unauthorised workshop, will not be reimbursed by Scanmaskin. If such repairs damage this
product these are not cover by the warranty agreement.
- 80 -
80
SCAN COMBIFLEX 800 PROPANE
www.scanmaskin.com www.scanmaskin.com
Scan Combiflex 800 Propane - Manual

8 EU Declaration

Declaration of conformity CE
Manufacturer Scanmaskin Sweden AB
Address Heljesvägen 10
437 36Lindome
Sweden
Product Grinding machine
Name Scan Combiflex 800
Serialnumber _________
Standards used including number
Machine directives 2006/42/EG
EMC 2004/108/EC
LVD 2006/95/EG
Harmonized standards
Safetyofmachinery EN ISO 12100:2010
Safetyofmachinery EN ISO 60204-1
Safe Torque Off EN 61800-5-2
Place of issue Lindome / Gothenburg / Sweden
Name of authorized representative Claes-Göran Bergstrand
Position Managing Director
Declaration
We declare that as the authorized representative, the above information in relation to the supply /
manufacture of this product is in conformity with the stated standards and other related documents
following the provisions of EEC directives.
Signature of authorized representative:
- 81 -
ENGLISH
81