Personnel Qualification; Safety Regarding Operation Of Machine; Electrical Safety; Propane Tanks - SCANMASKIN SCAN COMBIFLEX 800 PROPAN Manual

Scan Combiflex 800 Propane - Manual

2.13 Personnel qualification

Fundamental duties:
• Work on the machine may only be undertaken by trained personnel.
• Specify clearly the responsibilities of personnel for operation, setting up, servicing and
maintenance work!
• Make sure that only authorized personnel operate or work on the machine!
• Define responsibilities of the machine operator, with regard to traffic safety regulations, and
inform him not to take instructions from third parties who may not be complying with the local
safety requirements.
• Personnel, who are being trained to operate equipment, may only use the machine under
constant supervision of an experienced person!
• Work on electrical equipment may only be undertaken by a skilled electrician or by trained
persons under the supervision of a skilled electrician, as well as in accordance with the local
electrical engineering regulations.

2.14 Safety regarding operation of machine

Do not allow any method of working that impairs safety!
Recognized official procedures have to be used to ensure the machine is operated in safe
and best conditions.
Only operate the machine when all safety devices and related safety equipment are present
and operational!
Check the machine visually for any damage and defects at least once a day.
In the event of operational malfunctions the machine must be shut down immediately and
secured!
Secure the work area around the machine in public areas providing a safety distance of at
least 10 m (3.3 ft) from the machine.
Faults must be immediately rectified.
Carry out the switch on, and switch off operations in accordance with this user manual.
Before turning on the machine make sure that no-one can be endangered when the machine
starts up.
Never operate the machine when not in its upright position.
- 56 -
56
SCAN COMBIFLEX 800 PROPANE
www.scanmaskin.com www.scanmaskin.com
Scan Combiflex 800 Propane - Manual
Do not switch off or remove the exhaust and or the ventilation devices whilst the machine is
running!
All persons in the proximity of the machine must wear ear and eye protection as well as
safety shoes. In addition the machine operator must wear close-fitting protective clothing.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don't use the machine
if there are any foreign objects stuck into the surface. Such objects must be removed prior to
operation of machine

2.15 Electrical safety

The battery power source must be equipped fused according to the table in "1.1Power
specifications".
Work on electrical equipment may only be undertaken by a skilled electrician or by trained
persons under the supervision of a skilled electrician as well as in accordance with the local
electrical engineering regulations.
A second person must be in attendance whilst the electrical engineer is working on the
equipment.
The work area must be secured against any third party entering the work area. Follow local
electrical engineering regulations while working on the machine. Never leave a machine
unattended. Use only tools that are insulated against electricity.
Only start work after you are familiar with the electrical engineering regulations that apply
to the local area.
Only use voltage seekers that comply with the regulations when troubleshooting. From time
to time check voltage seekers to ensure that they are operationally efficient.

2.16 Propane tanks

The Propane tanks are constructed of either aluminum or steel. The tank used on propane
powered floor machines is classified as a 4E240 cylinder. Its rated capacity is 20lbs. and this
designation refers to the model of the tank. Actual propane capacity achieved during filling
can be less than, equal to, or slightly more than 20 lbs. Use only UL, CTC/DOT listed tanks.
• The propane tanks used on the floor machine is a motor fuel cylinder as listed by the
Department of Transportation. Unlike the common 20-lb propane outdoor grill tanks (which
are not legal for use on propane floor machines), the motor fuel cylinder has a number of
safety systems designed into it to ensure your safety at all times.
- 57 -
ENGLISH
57