Organizational Measures - SCANMASKIN SCAN COMBIFLEX 800 PROPAN Manual

Scan Combiflex 800 Propane - Manual
RESIDUAL RISKS
During the normal operating and maintenance cycles, the
operator is exposed to few residual risks, which cannot be
eliminated due to the nature of the operations.

2.12 Organizational measures

The user Manual is to be kept near the location where the machine is being operated and
must be within reach at all times.
In addition to this user Manual general and legal regulations regarding accident prevention
and environmental protection must be complied with as per local regulations.
Such duties may, for example, relate to the handling of hazardous substances, or to the
provision and wearing of personal protection equipment, as well as compliance with traffic
regulations.
The user Manual must be supplemented by other instructions, including the duty to supervise
and report incidents relating to particular working practices, for example work organization,
work procedures and personnel safety.
Personnel entrusted with working with the machine must read the User Manual before
starting work, in particular the "2Safety Regulations" chapter. To read these instructions
after work is commenced is too late. This particularly applies to incidental activities such as
setting up the equipment, carrying out maintenance work or training staff to work with the
machine.
From time to time the working practices of the operators are to be checked by a supervisor
especially to the items regarding awareness of safety and hazards.
Always wear Carbon Monoxide Indicator badges as an extra precaution.
The plastic indicator contains a colored indicator button that darkens in the presence of
Carbon Monoxide. The relative darkness of the indicator button indicates the level of CO in
the ambient atmosphere. Most indicator badges have a useful life of 30 days, depending on
the concentration of contaminants, humidity, and temperature.
Operators must tie back long hair, and not wear loose clothing or jewelry including rings.
There is a risk of injury through items getting caught, or being drawn into moving
machinery.
Eye and ear protection must be worn at all times!
Use personnel protection equipment if necessary or required by local regulations! Take
notice of all safety and hazard notices on the machine!
All safety and hazard notices at or on the machine must be kept complete and legible!
- 54 -
54
SCAN COMBIFLEX 800 PROPANE
www.scanmaskin.com www.scanmaskin.com
Scan Combiflex 800 Propane - Manual
If safety-critical changes occur to the machine or its working method, the machine must be
shut down immediately! The cause of the fault must be established, and rectified.
Changes, add-ons or conversation to the machine, which might impair safety, must not be
made, without the manufacturer's permission!
This applies in particular to the fitting and adjustment of safety devices.
Spare parts must comply with the technical requirements specified by the manufacturer. This
is always guaranteed if original spare parts are used.
Intervals for recurring checks and inspections specified in this User Manual must be
complied with!
To perform maintenance work correctly it is imperative to be equipped with the proper tools
for the task in question.
Repairs may only be made by Scanmaskin Sweden AB certified service technicians.
Some grinding work may generate sparks under certain circumstances. Personnel working
with the machine must therefore be aware of the risk of fire and how to handle a fire
situation properly.
Do not use the machine in areas with highly flammable and/or explosive materials.
- 55 -
ENGLISH
55