Registration Front/Rear Sensor Pcb Assy - Brother DCP-L8400CDN Service Manual

9.66 Registration Front/Rear Sensor PCB ASSY

(1) Release the wiring of the Registration front/rear sensor PCB ASSY.
(2) Remove the Taptite bind B M3x10 screw and remove the Registration front/rear sensor
PCB holder from the Paper feed unit.
Registration front/rear
sensor PCB holder
(3) Release the three Hooks and remove the Registration front/rear sensor PCB ASSY from
the Registration front/rear sensor PCB holder.
Registration front/rear sensor PCB ASSY
Harness routing: Refer to
Fig. 3-257
Hook
Fig. 3-258
" Paper Feed Unit"
3-178
Taptite bind B M3x10
Hook
Registration front/rear sensor
PCB holder
Paper feed unit
Confidential