9.55 Paper Eject ASSY
(1) Disconnect the two Connectors (CN1 and CN2) from the High-voltage power supply PCB
ASSY.
(2) Release the wiring of the High-voltage main harness ASSY.
CN1
CN2
<Right side>
(3) Remove the four Taptite bind B M4x12 screws and remove the Paper eject ASSY from
the Main body.
Paper eject ASSY
Harness routing: Refer to
High-voltage power supply PCB ASSY
Fig. 3-216
Taptite bind B M4x12
Fig. 3-217
"
Paper Eject ASSY"
3-155
Paper eject ASSY
Taptite bind B M4x12
Main body
<Back side>
Confidential