Brother DCP-L8400CDN Service Manual page 51

Error
Description
Codes
9801 Error occurred with the value
measured during color density
adjustment performed from the
control panel.
9802 Dot counter or develop roller
counter of color toner has
reached the upper limit during
color density adjustment
performed from the control
panel.
9803 Density patch measurement
ended unsuccessfully during
color density adjustment
performed from the control
panel.
9804 Error occurred with the value
measured during density sensor
sensitivity calibration.
9901 ---
9902 ---
9903 ---
9A01 Error occurred with the value
measured during auto color
registration performed from the
control panel.
9A02 Dot counter or develop roller
counter of color toner has
reached the upper limit during
auto color registration performed
from the control panel.
9A03 Error occurred during patch data
printing in auto color registration
performed from the control
panel.
9C01 ---
9C02 ---
9C03 ---
9C06 ---
9C07 ---
A000 Upon scanning the second side
in duplex scanning, scanned
data cannot be output with the
required number of pixels and
image processing is not
completed successfully.
Refer Error
to: Codes
2-72 A200 During document scanning, the
first side document scanning
position sensor detected that the
document length was 90 cm or
more.
2-72
A300 Though a document was fed
and conveyed by the specified
distance or longer, the first side
document scanning position
sensor did not detect the
passing of the paper.
2-73
A400 The ADF cover sensor detected
that the ADF cover was opened.
A500 Upon scanning a fax, the first
side CIS white or black
2-73
calibration data was not within
the normal range.
A600 Though a fax was scanned
again after A500 error, the first
side CIS white or black
calibration data was not within
the normal range.
2-74 A700 The ROM color parameter does
not match the first side CIS or
second side CIS.
2-74 A800 ---
A900 When an image was scanned
and processed, a scanning error
occurred.
2-75 AA00 ---
AB00 ---
AC00 Upon scanning a fax, the
second side white or black
calibration data was not within
the normal range.
AD00 First side scanned data cannot
be output with the required
number of pixels, and image
processing cannot be completed
successfully.
2-75
AF00 The first side CIS fails to move,
remaining at the home position.
2-21
Description
Confidential
Refer
to:
2-76
2-76
2-77
2-77
2-77
2-78
2-78
2-78
2-79
2-79