(5) Open the Back flapper holder.
Release the two Pins and remove the Back flapper holder from the Main body.
(6) Remove the two Taptite bind B M4x12 screws from the Fuser cover L.
(7) Remove the one Hook and one Pin and remove the Fuser cover L from the Main body.
Back flapper holder
Pin
Fig. 7-5
Main body
Taptite bind B M4x12
Fig. 7-6
7-5
Main body
Pin
<Back side>
Pin
Fuser cover L
Taptite bind B
M4x12
Hook
<Back side>
Confidential