Brother DCP-L8400CDN Service Manual page 16

DO NOT attempt to operate this product when a paper jam or stray pieces of paper are
inside the product. Prolonged contact of the paper with the fuser unit could cause a fire.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner
dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the
toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.
HOT SURFACE
After you have just used the product, some internal parts of the product will be extremely
hot. Wait for the product to cool down before you touch the internal parts of the product.
This product is heavy and weighs more than 20.0 kg. (44.1 lb). To prevent possible injuries,
at least two people should lift the product. One person should hold the front of the product,
and one person should hold the back, as shown in the illustration below. Be careful not to
trap your fingers when you put the product down.
If you use a Lower Tray, DO NOT carry the product with the Lower Tray as you may be
injured or cause damage to the product because it is not attached to the Lower Tray.
iv Confidential