Brother DCP-L8400CDN Service Manual page 412

LCD
Page Protection
Emulation
Auto I/F Time
Media Type
Paper Size
Copies
Orientation
P-Pos X-Offset
P-Pos Y-Offset
Auto FF
Auto FF Time
FF Surpress
Auto LF
Auto CR
Auto WRAP
Auto Skip
Left Margin
Right Margin
Top Margin
Bottom Margin
Lines
Error Print
Allocate the page memory used for the internal processing of data
in the computer before output. Set in the PCL-Core. There is not
the influence of the memory management problem of the machine.
Configure the setting for the Emulation. Change the setting of the
Function Menu. When the data includes the ENTER LANGUAGE,
the setting becomes effective. And this setting is ignored.
Configure the setting for the interface open time. The function is in
the PC-Print. When the PC-Scan/Remote-SetUp works on the way,
the setting becomes invalid.
Effective for the print from the computer. When set the type of the
paper on the computer, the setting becomes effective. And this
setting is ignored. The default value is different by the country
setting. "Thin" is the default for China and "Plain" is the default for
other countries.
Change the image development area. Does not set the Paper Size
of the Menu, set the drawing size of the PC-Print. When set the
size of the paper on the computer, the setting becomes effective.
And this setting is ignored. "Letter" is the default for the U.S.A. and
Canada and "A4" is the default for other countries.
Effective for the print from the computer. When set the number of
the copies on the computer, the setting becomes effective. And this
setting is ignored.
Configure the switching for the print direction. Effective for the print
from the computer.
Configure the setting for the offset print position of the landscape
orientation. Effective for the print from the computer. When set the
X-Offset on the computer, the setting becomes effective. And this
setting is ignored.
Configure the setting for the offset print position of the portrait
orientation. Effective for the print from the computer. When set the
Y-Offset on the computer, the setting becomes effective. And this
setting is ignored.
Configure the setting for the ON/OFF of the Auto Form Feed.
Effective for the print from the computer.
Configure the setting for the TimeOut, when the Auto Form Feed is
ON.
Configure the setting for the skip of the blank page. Effective for the
print from the computer. The blank data in the Copy/Fax cannot be
turned ON/OFF in this setting.
Configure the setting for the auto line feed.
Configure the setting for the auto Carriage Return.
Configure the setting for the auto CRLF at the print width.
Configure the setting for the skip at the back-end/tip of the paper
and add the blank space.
Configure the setting for the column space at the left end.
Configure the setting for the column space at the right end.
Configure the setting for the space at the top end.
Configure the setting for the space at the bottom end.
Configure the setting for the number of the lines in the PCL.
Configure the setting for the ErrorPrint of the BR-Script3.
5-28
Detail description
Confidential