Brother DCP-L8400CDN Service Manual page 62

Error Message
Upper line
Reload correct
Size
paper in Tray1,
mismatch
then press [Retry].
Reload correct
paper in Tray2,
then press [Retry].
Reload correct
paper in MP Tray,
then press [Retry].
Reload correct
Size
paper.
Mismatch
Open the Back
Small paper
Cover and then
press [Retry].
Middle line
The size of paper loaded in the
paper tray 1 and the one
specified from the driver are not
same when paper is fed from the
paper tray 1.
The size of paper loaded in the
T2 paper tray unit and the one
specified from the driver are not
same when paper is fed from the
T2 paper tray unit.
The size of paper loaded in the
MP tray and the one specified
from the driver are not same
when paper is fed from the MP
tray.
Upon fax reception, the paper
size setting is the one other than
A4, Letter, Legal, and Folio.
The paper size which is not
supported by the output tray is
set for printing from the printer
driver.
2-32
Error
State
Codes
9002
9003
9001
8E02
8D02
Refer
to:
2-67
2-67
2-67
2-66
2-66
Confidential