Brother DCP-L8400CDN Service Manual page 59

Error Message
Upper line
No Tray The paper tray
cannot be
detected, re-install
Tray2.
The paper tray
cannot be
detected, re-install
Tray1.
No Waste Install the Waste
Toner Toner Box.
Out of Press Stop Key
Memory
Out of Fax Delete unwanted
Memory fax data.
Print fax data from
All Settings>Fax
>Print fax
Print Data Print Data is full.
Full Press Stop[X] Key
and delete the
previously stored
data.
Print Unable Turn the power off
** and then back on
again.
Middle line
While the T2 paper tray unit is
open state, print or adjustment
operation was attempted.
The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(after the registration of printing in
the engine)
The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(before the registration of
printing in the engine)
The waste toner sensor detected
that no waste toner box was set.
The memory is insufficient to
expand the data of PC-Print.
The memory becomes full when
Fax preview is ON.
The memory becomes full when
Fax preview is OFF and memory
reception is ON.
The memory used to store secure
print data exceeded the memory
size for secure print data.
Error related to print
Refer to the error code of "**".
2-29
Error
State
Codes
8402
8505
8501
6300
C700
C800
Refer
to:
2-63
2-64
2-64
2-56
2-83
--- 4.10.2
--- 4.10.2
2-83
**
Confidential