Adf Unit/Hinge Assy L/Hinge R/Hinge R Support - Brother DCP-L8400CDN Service Manual

9.17 ADF Unit/Hinge ASSY L/Hinge R/Hinge R Support

■
A4 model
(1) Remove the Screw bind M3x8 screw and remove the Panel FG harness from the Main
shield cover plate ASSY.
(2) Remove the three Screw bind M3x8 screws and remove the Main shield cover plate
ASSY from the Main body.
Screw bind M3x8
(Upper side)
Panel FG harness
Screw bind M3x8
Screw bind M3x8
(Lower side)
<Left side>
Main shield cover plate ASSY
Note:
Note that the tightening torque is different between the upper side and lower side of
the Screw bind M3x8.
Upper side: 0.5±0.05 N
Lower side: 0.8±0.1 N
Screw bind M3x8
(Lower side)
Fig. 3-54
·
m
·
m
3-61
Main body
Confidential