Brother DCP-L8400CDN Service Manual page 113

■
Error code C700
Out of Memory
Press Stop Key
The memory is insufficient to expand the data of PC-Print.
Error code C800
Print Data Full
Print Data is full. Press Stop[X] Key and delete the previously stored data.
The memory used to store secure print data exceeded the memory size for secure print data.
< User Check >
- Print the print data stored in the memory.
- Divide the print data and print it.
Step
1 Main PCB failure
■
Error code D100
Print Unable D1
Turn the power off and then back on again.
An error occurred during modem initialization.
Error code D200
Machine Error
-
The machine detected that the modem PCB was disconnected.
Step
1 Connection failure of the modem
PCB flat cable
2 Modem PCB failure
3 Main PCB failure
Cause
Replace the main PCB ASSY.
Cause
Reconnect the modem PCB flat cable.
Replace the modem PCB ASSY.
Replace the main PCB ASSY.
2-83
Remedy
Remedy
Confidential