Brother DCP-L8400CDN Service Manual page 82

■
Error code 5001
Maintenance
Replace PF Kit MP
Number of used pages for the PF kit MP has reached the upper limit. (Printing is not stopped.)
Step
1 The PF kit MP is at the end of life
2 Main PCB failure if the error code
remains after resetting the
counter of the PF kit MP
■
Error code 5002
Maintenance
Replace PF Kit1
Number of used pages for the PF kit 1 has reached the upper limit. (Printing is not stopped.)
Step
1 The PF kit 1 is at the end of life
2 Main PCB failure if the error code
remains after resetting the
counter of the PF kit 1
■
Error code 5003
Maintenance
Replace PF Kit2
Number of used pages for the PF kit 2 has reached the upper limit. (Printing is not stopped.)
Step
1
The PF kit 2 is at the end of life
2
Main PCB failure if the error code
remains after resetting the
counter of the PF kit 2
Cause
Replace the PF kit MP. After replacing the
PF kit MP, refer to
for parts (Function code 88)" in Chapter
and reset the PF kit MP counter.
Replace the main PCB ASSY.
Cause
Replace the PF kit 1. After replacing the
PF kit 1, refer to
for parts (Function code 88)" in Chapter
and reset the PF kit 1 counter.
Replace the main PCB ASSY.
Cause
Replace the PF kit 2. After replacing the
PF kit 2, refer to
for parts (Function code 88)" in Chapter
and reset the PF kit 2 counter.
Replace the main PCB ASSY.
2-52
Remedy
"1.3.37 Reset counters
Remedy
"1.3.37 Reset counters
Remedy
"1.3.37 Reset counters
Confidential
5,
5,
5,