Brother DCP-L8400CDN Service Manual page 60

Color laser
Hide thumbs Also See for DCP-L8400CDN:
Table of Contents

Advertisement

Error Message
Upper line
Registration
Registration failed.
Insufficient Toner
for Registration.
Registration failed.
Press [Retry], and
try again.
Registration failed.
Turn the power off
and then back on
again.
Open the Top
Replace
Cover, replace
Toner
Toner Cartridge.
Replace the Waste
Replace WT
Toner Box inside
Box
the machine.
-
Scan Unable
**
Middle line
Dot counter or develop roller
counter of color toner has
reached the upper limit during
auto color registration performed
from the control panel.
Error occurred during patch data
printing in auto color registration
performed from the control panel.
Error occurred with the value
measured during auto color
registration performed from the
control panel.
Dot counter of the toner cartridge
(Black) or develop roller counter
has reached the upper limit was
detected.
Dot counter of the toner cartridge
(Cyan) or develop roller counter
has reached the upper limit was
detected.
During printing, dot counter of
color toner cartridge or develop
roller counter has reached the
upper limit was detected.
Dot counter of the toner cartridge
(Magenta) or develop roller
counter has reached the upper
limit was detected.
Dot counter of the toner cartridge
(Yellow) or develop roller counter
has reached the upper limit was
detected.
After the waste toner sensor
detected that the waste toner box
was almost full, pages more than
the specified number have been
printed.
Error related to scanning
Refer to the error code of "**".
2-30
Error
State
Codes
9A02
9A03
9A01
4C01
4C04
4C05
4C03
4C02
4800
Refer
to:
2-74
2-75
2-74
2-50
2-50
2-50
2-50
2-50
2-49
**
Confidential

Advertisement

Table of Contents
loading

Table of Contents