Brother DCP-L8400CDN Service Manual page 411

LCD
Auto FF
Auto FF Time
FF Surpress
Auto LF
Auto CR
Auto WRAP
Auto Skip
Left Margin
Right Margin
Top Margin
Bottom Margin
Lines
Error Print
■
Detail description
LCD
Manual Feed
Resolution
Toner Save
Density
Job Cancel Time out
Sleep Time
Detail description
Switching of the auto form
feed
Switching of the time-out
period of the auto form feed
Switching of the FF
Suppress
Switching of the auto LF
Switching of the auto CR
Switching of the auto CRLF
at the print width
Switching of the Skip at the
backend/tip of the paper
Switching of the margin at
the left end
Switching of the margin at
the right end
Switching of the margin at
the upper end
Switching of the margin at
the bottom end
Number of the text lines in
the page
Switching of the ErrorPrint of
the PostScript
Effective for the print from the computer, or for the print of the
NetWorkConfig/TestPrint/FontList/Configuration from the panel.
When select the tray on the computer, the setting becomes
effective. And this setting is ignored.
Effective only for the print from the computer. When set the
Resolution on the computer, the setting becomes effective. And this
setting is ignored.
Effective for all print, and change the setting of the Function Menu.
However, as for the Copy, this setting becomes invalid. When set
the Toner Save on the computer, the setting becomes effective.
And this setting is ignored.
Effective for the print from the computer, or for the print of the
NetWorkConfig/TestPrint/FontList/Configuration from the panel.
Link the setting of the Toner Save. Judge the both setting, and
decide the density. When set the Density on the computer, the
setting becomes effective. And this setting is ignored.
Configure the setting for the time until the host time-out at the Job
Cancel. The setting value is the second time scale.
Configure the setting for the time until shift to the Sleep Time.
Change the setting of the Function Menu.
5-27
Set value
On/Off
1 to 99 (seconds)
On/Off
On/Off
On/Off
On/Off
On/Off
0 to 145 (columus)
10 to 155 (columus)
0 to 2.00 (inches)
0 to 2.00 (inches)
5 to 128 (lines)
On/Off
Detail description
Initial
value
Off
5
(seconds)
Off
Off
Off
Off
On
0 (columu)
80
(columus)
0.5
(inches)
0.5
(inches)
60 (lines)
On
Confidential