Managing applications
7.1 SE management applications
SE Management applications execute on the Management Units and are fully integrated
into the SE Manager. For details, see
The following SE management applications currently exist:
BS2000 Backup Monitor
●
Storage Manager is a preinstalled add-on pack (in the Hardware → Storage menu, see
●
section "Managing storage systems" on page
The following optional SE management applications can be installed as add-on packs:
openUTM WebAdmin (see
●
ROBAR (see
●
openSM2 (see
●
If the administered SE server configuration has more than one MU (SE server with
redundant MU or two SE servers in a Management Cluster), every installation of these SE
management applications is listed in the tree structure, with the exception of the BS2000
backup monitor. The name of the MU on which the application is installed is given in
brackets after the name of the application. In the table of SE management applications, the
name of the respective MU is listed in the Management Unit column.
openUTM WebAdmin, ROBAR and openSM2 are chargeable products, each with its own
online help, which are realized as add-on packs.
7.1.1 BS2000 Backup Monitor
The BS2000 Backup Monitor monitors backup requests which have been submitted in the
BS2000 systems of the SE server configuration using the software products HSMS and
FDDRL. Whether or which information of a BS2000 system is transferred to the BS2000
Backup Monitor is controlled by an HSMS or FDDRL parameter.
U41855-J-Z125-3-76
is a permanent part of the SE Manager
page
159)
page
159)
chapter "Performance überwachen" on page
section "Management
281).
SE management applications
applications".
163)
157