Appendix; Operating Bs2000 With Putty - Fujitsu SE700 User Manual

14 Appendix

The sections below describe the alternative BS2000 operation using PuTTY and the key
assignments of the EMDS application of the operation instance BS2000 terminal.

14.1 Operating BS2000 with PuTTY

Users with the roles administrator, BS2000 administrator or operator have access to the CLI
commands bs2Console, bs2Dialog and svpConsole on the Management Unit (MU). Upon
entering the correct parameters, these commands open the correct operation instance
(BS2000 console, BS2000 terminal or SVP console) on the specified Server Unit.
Below, we will use a few examples to quickly outline how you can use these commands for
the alternate BS2000 operation under PuTTy.
In general:
– A prerequisite for this is a valid account for the role administrator, BS2000 administrator
or operator on the Management Unit.
Both local accounts and LDAP accounts can be used.
– The respective command is specified in PuTTY as follow-up command.
i
– Some special settings are required for an ideal display and the use of specific shortcuts.
The administrator can also open a Linux shell on the Management Unit and can use this to
call CLI commands. The cli_info command lists the M2000-specific commands which
are available.
A detailed syntax description of the CLI commands is provided in the CLI command
reference, see the online help under Further information → PDF documents.
U41855-J-Z125-3-76
An administrator has access to the CLI and can therefore use the commands
directly in the shell.
331